The best price I found was like $450 but that has been a while back and it was on clearance I think $520 is the typical internet price. For $150 more you can get this 18/36 from Grizzly
I think it is a better deal.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Best price Performax 10-20 plus http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10050 |
Page 1 of 1 |
| Author: | bob J [ Thu Dec 28, 2006 6:37 am ] |
| Post subject: | |
Does anyone here know who has the best price for a Performax 10-20 Plus? |
|
| Author: | Michael Dale Payne [ Thu Dec 28, 2006 6:48 am ] |
| Post subject: | |
The best price I found was like $450 but that has been a while back and it was on clearance I think $520 is the typical internet price. For $150 more you can get this 18/36 from Grizzly
I think it is a better deal. |
|
| Author: | crowduck [ Thu Dec 28, 2006 7:04 am ] |
| Post subject: | |
I just got one from Amazon.com, and they have them now for $487 with free shipping. The Grizzly looks good, but power requirement is a consideration often overlooked. Some of these machines need 20 amp elec service. Don't know if that's the case with the Grizzly, but I'd check 1st. Shipping for the Grizzly is also an additional $85, but the sanding paper prices are certainly great. CrowDuck |
|
| Author: | Michael Dale Payne [ Thu Dec 28, 2006 7:21 am ] |
| Post subject: | |
1-1/2 hp 110v 15amp for the G0458 18/32 opened from Grizzly |
|
| Author: | bob J [ Thu Dec 28, 2006 8:01 am ] |
| Post subject: | |
Hey Crow, Do you have address for the $485 + free shipping site? |
|
| Author: | crowduck [ Thu Dec 28, 2006 8:38 am ] |
| Post subject: | |
Bob, Just go to Amazon.com and enter "Performax" in the 'Search' window. Usual shipping is $99, but is free at least for today. I just received mine yesterday, and haven't had a chance to try it out. CrowDuck |
|
| Author: | bob J [ Thu Dec 28, 2006 9:13 am ] |
| Post subject: | |
Crowduck, Got it! Good price + no shipping + no 8% sales tax. Thanks much |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|